To change the Time Shift on Android TV application go to the Settings menu option and navigate to the Time Shift button: Select the Time Shift and press OK. Use UP and DOWN buttons to select the proper value. Press the OK button to save the time shift value.
Pay attention, please! In the EPG, on the Alfa UX4 box, only the names of the programs are displayed. There are no program descriptions on this box for all channels.
To fix “Error mounting root fs”, follow the instructions: Prepare an empty USB drive. Format the USB drive to FAT32 format. Usually, it’s the default format. Download the file to your computer. Rename it to imageupdate. Create the folder mag256 in the root of USB drive. Copy the file you downloaded to this folder. Insert the USB […]
How to change a resolution on Alfabox UX3 via BIOS (no signal, mode not supported, missed matched mode)
If you connect Alfabox UX3 and the screen is “jumping” or there is a black screen and you see one of the messages on the screen: no signal mode not supported missed matched output That means the resolution is not supported. The resolution has to be changed from BIOS (Basic Input/Output System). Follow the steps […]
Enjoying your new TV service In the main menu, you will see several icons with different applications. To move on the screen use right, left, up and down arrows. Select the icon that corresponds to your service, then pressOK on the Alfabox remote. You will see categories and channel list on the left side and programs on […]
If after turning the Alfabox on, the volume is too high, the Initial volume has to be changed. Follow the steps below to change the initial volume: Press Set on the remote to go to System settings. Select Audio and press OK to confirm. Go to Initial Volume and decrease the number from 100 to 50-60. Use arrows to […]
To change resolution follow the instructions below: Press SET on the remote. In the System settings select Video and press OK. Go to Video Output Mode and using the right arrow change the resolution: – If your Alfabox is connected to the TV via composite cable – select: NTSC 480i. – If your Alfabox is […]
Program Guide uses time set on the box. The Box gets time from the time server that is set in settings. If there is no program guide available then NTP server is not set properly. Follow the instructions below to set up the NTP server: Click SET to go to System Settings screen. Select Servers and […]
Press and hold service button (FN) on the back side of STB until STB is power off, or during 2 seconds after power on. Switching between modes done by releasing button at the specific time according to the LED indication. There are 4 modes: STB load from first U-boot; Switch to alternative NAND; Reset to […]
How to change a resolution on Alfabox UX1 and UX2 via BIOS (no signal, mode not supported, missed matched mode)
If you connect Alfabox and the screen is ‘jumping’ or there is a black screen and you see one of the messages on the screen: – no signal – mode not supported – missed matched output, that means the resolution is not supported. The resolution has to be changed from BIOS (Basic Input/Output System). Follow […]